top of page

The Pico wireless control is a flexible and easy to use device that allows the user to control Lutron wireless load-control devices from anywhere in the space. This battery-operated control requires no external power or communication wiring. (Requires a Lutron RA2 Select Main Repeater and inline module)

Lutron RA2 Select Pico Wireless Controller 3 Button Raise Lower and Light

GST Included |
    • You can use a Pico wireless control anywhere in the space to control loads with a touch of a button. 
    • It uses the Lutron reliable Clear Connect RF technology to communicate wirelessly with wireless load controllers
    • The RF range: 9m through wall
    • Long battery life: 10-year battery life
    • You can easily add a new and/or additional point of control without the need for new wires
    • Easy configuration for use as a handheld control, wall-mount control, or table top control with use of the optional pedestal.
    • Applications: residential (bedroom, living room, car) and commercial (hotel guestroom, conference room, private office).
    • Easy reconfiguration for use as handheld remote, wall mount control (with or without faceplate), or a table top control (pedestal sold separately).
    • This battery powered Pico wireless control requires no wiring.
    • Frequency: 868.0 – 869.8 MHz
    • Type: 3 Button Wireless Control with raise/lower. 
    • Buttons: "ON button" - the lights brighten to full intensity. "RAISE button" - lights increase in intensity. "LOWER button" - lights decrease in intensity. PRESET button - Tap once: Sends device to preset levels or positions. OFF Button - lights dim to OFF. 
    • Finish: white plastic (texture white).
    • TRA Certified. CE Marked
    • Operating voltage 3 V. One (1) CR2032 battery (included)
    • Unique system addresses prevent interference between systems.
    • Ambient operating temperature: 0 °C to 60 °C (32 °F to 140 °F)
    • Maximum 90%, non-condensing relative humidity
    • Indoor use only
    • Mounting of any RF device on or in close proximity to a metal surface will drastically reduce the effective range of radio signal transmission or reception.
    • All RF devices must be mounted on non-conductive materials to ensure proper performance.
    • If you wish to mount your Pico® wireless control to a metal surface, the PICO-MOUNT-1-XX-CPN5733 will be required in order to maintain proper RF performance. 
    • Dimensions: Width 66mm, Height 33mm, Depth 8mm
bottom of page